Warmzone navigation arrow.
Radiant heat info
  • Warmzone offers up-to-date information about top quality radiant floor heating and snow melting solutions.
Radiant heat services corner image.
  • Warmzone designs the best solution for your situation.
  • Warmzone directs you to what products will work best for your needs.
HACKER SAFE certified sites prevent over 99.9% of hacker crime.
Navigation arrow.  HOME Navigation arrow.  DESIGN CRITERIA Navigation arrow.  PROJECT PREPARATION Navigation arrow.  INSTALLATION PANELS  INSTALLATION WIRING

  RetroHeat logo.

WIRING THE HEATING PANELS

 

 The heating panels are wired in parallel according to the following figures:

 Wiring the RetroHeat floor heating panels.

 

Non-heating lead wires are attached to the connectors which were previously crimped to the heating panels. Using the supplied crimping tool, the wires are crimped in place using the barrel crimping section of the tool. Insulators are then snapped over the connectors.

 

Preparing RetroHeat floor heating panels for installation.

Completing the Installation

Once the wiring has been completed for all of the panels, the tests outlined in the installation manual should be completed to assure the system will work properly. The non-heating cold leads can then be wired to the thermostat.

 

Right click and "Save Target As" to download the PDF:

 

Navigation arrow.   Download the RetroHeat Installation Manual   PDF icon.