Contact Warmzone Toll Free




HACKER SAFE certified sites prevent over 99.9% of hacker crime.








Heat Cable Radiant Heat Systems

Heat Cable can be used in a variety of radiant heat applications.
Warmzone heat cable is a very durable, 10 gauge, coated copper radiant heat cable that is chemical and gasoline resistant. This heating element is designed to be installed in concrete, asphalt, mortar bed, pavers, or thinset. Applications for Heat Cable include radiant space heating, radiant floor heating, and snow melting.
Click here to learn about Zmesh

Zmesh radiant heat systems are extremely thin and durable.


Durable Heat Cable is designed for new and retrofit radiant heating projects.

Heat Cable can be used as a retrofit solution for existing surfaces. Heat Cable is set 2" below the surface and spaced 4" apart. The heating element is attached to remesh (welded wire fabric) which acts as an anchor for the Heat Cable radiant heat system.

Heat Cable can be installed to provide electric radiant heating for existing driveways, walkways, etc.

Heat Cable can be retrofit into existing concrete or asphalt. Grooves are saw cut into the pavement 1/4" wide and 1" deep. Heat Cable is installed in the grooves and filled with Backer Rod then sealed with Sikaflex.


Electric Heat Cable radiant floor heating system.

Warmzone offers innovative methods and top quality products for radiant heating. Utilizing state of the art components, these systems are virtually maintenance free and are safe and efficient in operation. Our heat cable has an industry leading warranty and is engineered to provide simple and problem-free radiant heat solutions.

Installing Heat Cable for radiant heated kitchen floor.

Heat Cable in mortar bed under tile floor for kitchen and breakfast nook.

POWER REQUIREMENTS

  • Heat Cable systems heating a 15 to 110 sq. ft. area require a 120 V. 20 amp breaker

  • Heat Cable systems heating a 111 to 200 sq. ft. area require a 240 V. 20 amp breaker

  • Heat Cable systems heating a 200 to 485 sq. ft. area require a 240 V. 30 amp breaker

  • Zmesh systems heating a 21 to 300 sq. ft. area require a 240 V. 20 amp breaker

  • Zmesh systems heating a 300 to 740 sq. ft. area require a 240 V. 30 amp breaker