Snow Melt Cable
ClearZone snow melting cable is a twin-conductor core cable designed for permanent, embedded installation in concrete, asphalt, and paver bases. Laid by hand during installation, it gives you full control over spacing and coverage, making it the right choice for any surface that isn’t a simple rectangle.
- Adapts to any shape. L-shapes, curves, ramps, and irregular perimeters
- Paired with weather-responsive controls and sensors
- Free custom system design with every inquiry
Not sure if cable is right for your project?
Tell us about your surface, area size, and location. Our specialists will recommend the right system and walk you through it. Free, with no obligation.
What people say about us
“We have had your Warmzone snow melting system in our driveway for three years. It works completely as advertised. Because of the steepness of my driveway, it has certainly been a game changer for us. We have no problems getting in or out. The system works perfectly. Feel free to use my recommendation anytime”
“This past weekend, we received over four inches of snow and temps -15 degrees C . . . That’s like Green Bay cold!
Anyway, as you can see, the heated driveway is doing its job. Just a week ago, my electrician installed the correct type of wire for the CDP 2 so everything is functional now. A lot of folks in our neighborhood stop by on their walks and have conversations about my driveway, or ask questions if I am outside.
I know that some think this would be extremely expensive to operate, but last month, with Christmas lights on every night, I saw only a $150 increase in my electrical bill. Also, we only have 2 or 3 months of significant snow in Calgary so it won’t break the bank, or my back (shoveling) and delivery people don’t have to crawl up the slope in fear of slipping!”
“I just wanted to send a note to tell you thank you so much for your help last Monday evening. We had a blizzard Christmas day and the Warmzone system worked great! Thanks again for your help after hours.”
Is Cable Right for Your Project?
Both ClearZone snow melting cables and ClearZone mats use the same heating element. The difference is how they install, and that comes down to your surface shape.
-
You need full spacing control
Set your own spacing (within manufacturer recommendations) for tighter or wider coverage depending on your climate and snow load.
-
Your project is higher-voltage
ClearZone cable is available in 208V, 240V, 277V, and 480V configurations, the necessary flexibility for parking structures, loading docks, and large slabs
-
Obstacles, drains, or transitions mid-surface?
Cable routes around them. However if your area is a straightforward rectangle, ClearZone Mats may be a faster and simpler option.
Still not sure? We'll tell you in one call
Describe your surface and area. Our specialist will confirm which product fits your project. Free, no obligation, same day.
What Makes ClearZone Cable Different
The technology and support behind a permanently embedded snow melting cable built to last.
Adaptable Technology
The cable automatically adjusts heat output. Full power when it’s coldest, reduced consumption as the surface warms, helping prevent energy waste.
Expert Support
Every inquiry includes a free custom system design from our engineers. When your contractor installs, our technical team is available to answer questions throughout, at no charge.
Limited Warranty & Support
ClearZone cable is backed by a limited warranty upon registration, supported by Warmzone’s in-house technical team.
Surfaces & Applications
ClearZone snow melting cable can be planned for most major outdoor hardscape surfaces, for both residential and commercial applications.
Built for Outdoor Hardscape
ClearZone cables and mats are planned around your surface type and installation method. The system is embedded during new construction or a fresh overlay, invisible once installed.
Every Outdoor Space, Covered
From a single front walkway to a full commercial parking structure, each application has its own sizing, wattage, and sensor requirements. Our free system design service handles all of it.
Installing on a Project?
Contractors and installers get access to bid specifications, free installation training, and direct technical support in our Professionals section.
Questions About ClearZone Cable
Still have questions? Our specialists answer them every day, and for free.
Both use the same heating element. Cable is laid by hand, so it works on curved driveways, stairs, ramps, and any layout that isn’t a simple rectangle. Mats come pre-set at factory spacing, which makes them faster to install on straightforward rectangular areas.
ClearZone cable is embedded during new construction or a fresh overlay by hand across the surface, so spacing and coverage are planned around your exact layout rather than a fixed factory pattern. Every project starts with a free custom system design from our engineers, and installation itself is carried out by a licensed electrician or qualified contractor.
Yes. ClearZone cable is always paired with weather-responsive controls and sensors so the system activates based on outdoor conditions. Our specialists can confirm the right control setup for your specific project when you request a quote.
ClearZone cable can be planned for most major outdoor hardscape surfaces, including concrete, asphalt, and pavers/stone, for both residential and commercial projects. Compatibility with additional surface types depends on the specific configuration. Our team can confirm the right fit for your surface during system design.
Talk to a specialist
Tell us about your project and get a custom ClearZone system quote. Free, no obligation.