Category Archives: HOTNEWS

HOTNEWS

Hydronic and Electric Radiant Heating Systems – Comparing Operational Costs

If you’ve decided to add a heated driveway or underfloor heating system to your list of home improvement projects, hydronic heat might be the popular choice, but it’s not necessarily the best, or least expensive way to go. Electric radiant heat is a new, equally viable option that may give you some pause when it comes time to fork over that cash you’ve been stashing for your home improvement projects.

Installing a hydronic heated floor. Pex tubing being installed in Rau Panel.

Let’s say you are considering adding radiant heat to your bathroom-remodeling project. In a small space, typical heating times can make all the difference, right down to the floorboards. A hydronic heated floor system installation requires PEX tubing placed 1½-2 inches into a cement slab for optimal results. At this depth, you could be waiting a few hours for things to heat up. To avoid the inconvenience of those long wait times, most homeowners tend to leave their hydronic heat systems on throughout the winter months, consuming more energy. An electric radiant heated floor can reduce that wait time by as much as 6½ hours. Radiant heating mats can be easily rolled out above the sub-floor, just under the flooring material, and can heat a tile floor in 30 to 60 minutes flat. With more reasonable wait times, programming the system to turn on and off potentially saves you more dollars, and frankly, makes more sense.

Installation costs tend to be higher for hydronic heating systems. Returning to our bathroom project, the $300 to $400 you would expect to spend installing a radiant heated floor will cost you upwards of $4,000 to $5,000. The upfront investment for equipment, labor and floor height issues make hydronic systems cost prohibitive in small- to medium-sized areas. Hydronic systems require a boiler, which accounts for a big chunk of the budget. Unlike radiant heated floor mats, hydronic floor heating systems also elevate the floor by a couple of inches, a significant difference that can cause big problems for you during your bathroom remodeling job. Radiant heated flooring installed will elevate the floor by only ⅛ of an inch. In this scenario, at least, it probably would not make much sense to run a series of tubing for a hydronic system in your bathroom.

Placing heat cable in the grooves of a floor heating insulation panel

Installing heat cable in a floor heating insulation panel.

Of course there is the issue of maintenance and repairs. Hydronic systems circulate continuously, and rely on a system of valves and manifolds prone to sedimentation, mechanical problems and maintenance issues. If a hydronic heating system installation is faulty, it is difficult to find a leak, and because of the nature of the installation, even if the leak is found, it is difficult to repair. With electric radiant heat systems, fault detectors can pinpoint the exact location of a break. After breaking just one or two tiles, the electric cable can be spliced and the tiles replaced, a far better (and less costly) scenario than I’m imagining with our hydronic heated bathroom floor. Fortunately, Warmzone’s electric floor heating systems are built to last and feature the best warranty in the business. Generally, most homeowners opt for electric radiant heating. It’s well suited for small- to mid-sized home improvement projects. And the initial investment is modest enough that you won’t find yourself over your head, or under water when it’s time to tap into your home improvement budget.

ComfortTile floor heating mat, cable and thermostat

      ComfortTile floor heating mat, cable and thermostat.

The floor heating mat features pre-spaced heat cable woven into a durable mat that simplifies the installation process.

Radiant Snow Melting for the Masses

We are nearing the end of another snow season, one that has been especially brutal in terms of snowfall, and it’s likely that most of us have grown tired of shoveling snow from our driveways. As you sit to rest your aching back, imagine a winter without having to shovel snow or throw down any deicing salt. Enter radiant heated driveways and snowmelt systems. Electric radiant snow melting systems are not just a fantasy anymore; they are the ticket to easy snow removal, and a much more pleasant winter.

Radiant heated driveway

What used to be regarded as a luxury for exclusive upscale neighborhoods is now a reality for all of us. Given the custom options and affordability of radiant snow melting systems, heated driveways, steps and walkways have become increasingly popular among homeowners and businesses alike. Warmzone electric snow melting systems are fully automated, extremely durable and are built to last a lifetime.

The advancements in technology have translated into many benefits for consumers, including a wide range affordable installation options. Radiant snow melting systems can be installed in new and existing driveways, and in just about any type of custom configuration. Whether you want your whole driveway surface heated or just the tire tracks or other specific areas, Warmzone can design the ideal snow melting system for you.

Snow melting systems consist of a heat cable or wiring system installed within the surface of the driveway or sidewalk. When conditions for snow are present, a sensor will automatically signal the control unit which actives the system. The surface is heated and your driveway is now a “snow-free zone”. How much more convenient can it get than arriving at home on a snowy day to a nice clear driveway? No shoveling required!

HOTNEWS

Of Water and Wires: Hydronic Heated Driveways vs. Electric Heated Driveways

‘Ride the Current’ or ‘Go With the Flow’?

If you’ve finally put down the shovel and decided to purchase a heated driveway system, will you be going hydronic or electric? If you’re a newcomer to the concept of driveway heating, hydronic and electric are both popular, and extremely viable forms of driveway heat, and Warmzone has the expertise, and experience, to help determine which is best for you. What these systems share in common—four key components you should be familiar with before purchasing a heated driveway system:

  • The Heating Element (Embedded in the driveway)
  • Snow Sensor
  • Power Controller Unit (Powers the heating elements on and off)
  • Power Supply (Circuit breaker panel)

Of the components mentioned above, the heating element and the control source distinguish hydronic heated driveway systems from electric heated driveway systems.

Hydronic Heated Driveway Systems: Going with the Flow
The heating element for a hydronic snowmelt system, as you may have guessed, involves water. Specifically, hydronic heated driveways use what is known as closed-loop tubing to heat the surface of the driveway. The tubing is generally made of a flexible (and quite durable) polymer or synthetic rubber to circulate a mixture of hot water and propylene glycol (antifreeze). The fluid is warmed to temperatures between 140 to 180 degrees F to deliver enough heat for snow melting.

Heated driveway with brick pavers

A water heater or a boiler is the chief source of heat for a hydronic driveway heating system, which can be powered by any energy source that satisfies the btu requirements, including natural gas, electricity, oil, wood, or even solar collectors. A circulating pump and supply and return manifolds, installed in an easily accessible location, transfer the water between the heat source and tubing.

Electric Heated Driveway Systems: Riding the Current
Unlike hydronic systems, electric heated driveway systems use hot wires to heat paved surfaces. These wires are surrounded by layers of insulation, copper grounding braid and a protective outer layer of PVC or polyolefin to form a flexible cable about ⅛ to ¼ inch in diameter. What’s great about the heat cables is the flexibility of the application. Cable is available on spools as well as pre-spaced and woven into mats, and can be customized (cut) to suit virtually any type of layout, including odd-shaped driveways, common walkways and sidewalks, etc.

After being triggered by the snow sensor, the control unit then powers the heat cable to warm the driveway. To reduce the power demands (and operating costs), you can install cables in just the tire tracks of a driveway rather than the entire area. Warmzone provides complete system design services to ensure that you receive the best system layout and products for your project.

Radiant Heat for Custom Applications

Finding a Radiant Heating Solution as Unique as You Are
As temperatures plummet and heat bills skyrocket, consumers everywhere are turning to radiant heating systems. As the most affordable and customizable option out there, radiant heating is quickly making a name for itself as a titan in the heating market.

So radiant heating is the latest and greatest, but what exactly is so great about it and what can it do for you? One word: customization.

When it comes to radiant heating, the possibilities are endless. Warmzone can design a radiant heating system completely customized for your home and lifestyle, and it’s as easy as one, two, three!

Choose
The first step of your radiant heating revolution is studying the available options and talking with a radiant heat expert to help determine the best radiant heat system for your needs.

Indoor Radiant Heating
Radiant heating can be installed under just about any surface, including tile, carpet, wood, etc. Put it in your bathroom, your kitchen, your living room—anywhere you need heat. Each room, or zone, can be controlled with its own thermostat. giving you great flexibility along with outstanding efficiency. Radiant floor heating is an affordable way to keep your house perfectly warm without racking up the electricity bill.

Outdoor Radiant Heating
You can also enjoy the benefits of radiant heating outdoors. Exterior snow melting systems keep your property safe by preventing pesky snow and ice buildup. There are several outdoor radiant heating products and options, including heated driveways, sidewalks, roof heating, pipe tracing, and portable heating mats; all of which will make your life a little easier in the harsh winter months.

Design
We realize that your radiant heating system isn’t the same as the next customer’s, so we’ll work with you to come up with a radiant heating system tailor-made to your needs.

Example of a Warmzone floor heating AutoCAD

Once we assess your project’s requirements, our team will design a custom radiant heat solution with an AutoCAD of your system, complete with all the technical specs you need so you know all the details prior to any installation taking place.

Enjoy
With radiant heating, your only job is to sit back, relax, and enjoy your custom radiant heating solution. Let your heated floors warm your home evenly and efficiently. Sit back and watch from the warmth of your living room as your radiant heated driveway does the shoveling for you. And sleep in peace knowing that your gutters and pipes are safe from nasty and potentially devastating snow and ice buildup.

Why settle for an out of the box heating solution? Let us help you customize a radiant heating system that meets your needs, fits your budget, and keeps you and your family warm and safe.

HOTNEWS

Back on Track with a Heated Driveway

Heated Driveway System in Illinois Paves the Way to Big Savings for one Warmzone Customer

When a Warmzone customer in rural Illinois found he did not have the resources to heat his entire driveway as originally planned, Sales Manager, Bryan Morris, offered a reasonable alternative. “Tire tracks were a great option in this scenario,” he explained, “because you can still get a heated portion that allows you to drive in and out, without breaking the bank. After consulting with the customer and our design team, we laid out the options (verbally and with drawings) before deciding on a more cost-effective, two-track heated driveway solution. Ultimately, heating two tire tracks (500 sq.ft.), as opposed to heating the entire 1,250 sq.ft. driveway, resulted in a $3,900 cost savings.”

Retrofitting asphalt driveway with heated tire tracks-1      Retrofitting asphalt driveway with heated tire tracks-2

Another consideration was the lack of available power. “To heat an entire driveway would have required a large number of amps from the home’s electrical power panel,” Morris stated. “Most homes only have a 200 amp panel, yet it takes approximately 180 breaker amps per 1,000 square feet to heat an entire driveway.”

The two-track radiant heated driveway system required installation of four Warmzone ClearZone snow melting mats, a 200-amp Warmzone electrical timer panel, an aerial mounted moisture/temperature snow sensor, a remote manual control unit and an NEC marker plate. Tire tracks were easily installed by rolling out the mats like sleeping bags. A protective asphalt layer was then raked over the tire track mats (photo 2) before the final surface coat was applied. “We use an asphalt machine that straddles the heating element to prevent damaging the heat cable,” offered Morris.

Asphalt driveway being retrofitted with heated tire tracks - 3      Heated asphalt driveway retrofitted with heated tire tracks.

The great news is that you don’t have to pour a new driveway to benefit from a heated driveway. Warmzone can customize your system to fit your needs and budget. “On this project,” said Morris, “the customer was paving the whole driveway anyway. Some customers pick other install methods, such as saw cutting, to achieve their goals.”

Saw cutting is cutting grooves or paths and inserting the heat cable in areas where heat is desired. With certain driveway heating systems, it is also possible to pave over the mats and create the appearance of a seamless transaction. “You can cut out the area you want to heat and then pave only that area,” Morris added. ClearZone is used under cement, asphalt and pavers on a regular basis.

Flexible options make heated driveway solutions a very popular equity booster for homeowners, and are becoming a popular home improvement option. “On average,” Morris stated, “the overall materials (cable, electrical and auto sensors) cost $6.00 per sq.ft. for 1,000 sq. ft., and the operating cost per 5-hour storm is $18.00, or $3-4 per hour depending on the state the heated driveway system is installed in and the power company’s cost per kilowatt hour.”

While the initial cost of installing a radiant heated driveway system may seem a bit daunting, the benefits of driveway heating are well worth the initial investment, the most obvious being convenience. Heated driveways don’t require shoveling, harmful salt and chemical applications or expensive snow removal services. Instead, driveway heating systems provide a safe, thorough snow removal solution with curb appeal, solving snow  removal challenges posed by problematic driveways, steps, and other heavy traffic areas.

Heated driveway systems are fully automated, so they will automatically turn on or off when needed. “If it snows at 3 a.m.,” Morris smiled, “our customer will wake up to a clear driveway. He now has a reliable, efficient snow removal solution.”

Project Spotlight – Colorado Homeowners Install Solar Powered Radiant Floor Heating System

When two Colorado homeowners decided to build a new home from the ground up, they had two main objectives in mind. They wanted a home just for them and they wanted to be as eco-friendly as possible. One of the components they chose in their new construction was to install radiant floor heating through the 1600 square feet downstairs and 900 square feet upstairs.

After doing some research and finding Warmzone online they were pleased with the many options available for various applications and the customer support offered during the entire process.

These Rocky Mountain homeowners had several great reasons for wanting to go the radiant heat route. A major consideration was allergies and how forced air systems exacerbate this condition. Cost was another concern, as was the noise of a running furnace and the desire for a comfortable, even-air temperature throughout the home. Many customers are finding their way to radiant floor heating for some of the same well thought-out reasons.

Installing radiant floor heating cable

In order to accommodate the necessary electricity needs for a radiant floor, they installed 28 solar panels to meet the demand of the electric heat. This means they are using electricity solely produced by them, helping to keep costs down and mother earth smiling.

This project called for ComfortTile heat cables and a low-voltage floor heating system laid under a variety of flooring throughout the home. The Colorado couple chose tile, wood laminate, and carpet in various parts of the home. The radiant flooring systems were chosen because of their particular capabilities and installed throughout different zones. Warmzone provided the design layouts and helped walk them through the entire process.

When asked about the benefits of using radiant floor heating, the homeowner produced a long list, including evenly spread heat through the whole house, toasty floors, noiseless heating system with easy-to-program thermostats, lack of dust, and no need to wear shoes indoors anymore.

Solar panels installed to power radiant floor heating system

Asked if they would recommend radiant floor heating to others Jane responded, “Definitely! Check out the different flooring options and applications and determine where you want the zoned heating.” Warmzone provides customers with a variety of options and helps you select the best solution for your home and budget.  Warmzone prices, product offerings and professional design services are among the best in the industry.

HOTNEWS

Powerblankets – Rugged Durability and Unlimited Versatility

Powerblankets Perform Under Extreme Conditions

Warmzone is known for its innovative heating solutions. If it kicks out heat better than the competition, chances are Warmzone has investigated it, tested it, or sold it. One of the leading multipurpose product lines available through Warmzone are the patented Powerblanket® outdoor heating solutions. While the Powerblanket has specific heat-spreading properties that deliver a lightweight targeted heating solution, it can in no way be said that it does only that. The Powerblanket is a versatile, weatherproof warming blanket that has many universal uses, including heated tote boxes, barrel warmers, concrete curing mats and other solutions that aid in the heating or thawing of various materials and equipment.

Powerblankets were initially designed as concrete curing blankets in construction jobs. A Powerblanket utilizes electricity to provide the spread of heat which warms concrete evenly during the curing process. What results from the heating power of these concrete curing blankets is the ideal curing with crack-free finish that every project manager dreams of. The Powerblanket helps retain moisture during wet concrete curing, bringing it to the desired PSI more quickly and definitely more efficiently. When Powerblanket is used as a concrete curing blanket, they may be used in both cold and warm weather, in turn protecting the concrete from rapid drying, freezing, or cracking. Powerblankets achieve a compressive strength in concrete of 4300 psi in only nine hours. The result is defect free and a better product all around for the customer.

Powerblanket tote warmers, hotboxes and portable heating

Powerblanket doesn’t stop there however. Although most often associated with construction jobs, many customers are finding out about the many uses of this versatile warming blanket. Even though they are designed to be durable enough for the largest construction projects the Powerblanket can be used for many home projects.

If you do any projects outside you may find that your list of uses for a warming blanket is extensive. You may not have known that one product could achieve so many results. If you have need to thaw ground during cold months, simply plug in a Powerblanket and let it go to work for you. Cemetery workers often use Powerblankets for this purpose.

Another helpful application is for equipment warming. This includes tractors, machines, construction tools, snowmobiles, and engine warmers. If dependable start-ups on cold winter mornings are a must for you, the Powerblanket engine warmer may be your best cold-weather friend. All that is required is a 120V outlet.

Powerblanket engine warmer

What about outdoor pets or livestock? They need to be kept warm year-round. Powerblankets are proven to be durable and safe enough for animals to walk or sleep on. Drop it, roll it up, or even fold it, you can’t hurt this durable heating blanket, and neither can your animals. This is an ideal way to keep your animals warm during winter as well as keep water troughs from freezing.

Should you require the use of any liquids or gases in the freezing days ahead, wrap a Powerblanket around any container and keep the liquid flowing. Powerblankets are available for heating small paint containers, propane tanks, barrel heaters and water containers, and other temperature sensitive materials.

And don’t forget about protecting exposed pipes during cold winter nights. The Powerblanket warming blankets provide safe, efficient pipe freeze protection quickly and safely. This eliminates the need for expensive propane burners.

Versatile, handy, user-friendly, affordable to operate and oh-so-many uses! The Powerblanket is a product worth investigating for any outdoor warming needs.

Snowmelt Systems Feature Top Rated Safety Design

Your Homeowner’s Insurance Policy will not be Void with Driveway Heating
If you have any hesitation about installing an electric snowmelt system for fear of jeopardizing your homeowner’s insurance, let’s clear this up now. Some fear that enjoying the benefits of a heated driveway means you have to forfeit certain benefits on your insurance policy. Not so with any Warmzone snow melting system. Using any of our radiant heated driveway cables is safe and approved for use in residential properties.

Each Warmzone driveway snow melting system is UL safety approved for both residential and commercial use. Warmzone electric snowmelt systems meet the highest industry standards of safety to ensure there is no added risk for fire damage. These industry-leading snowmelt systems are designed to be fail proof and maintenance free. If a heating cable does become cut or damaged in any way, the system’s GFEP (Ground Fault Equipment Protection) will automatically shut-down the power to the system. This enables repairs to take place before any hazardous effects come into play.

Large heated paver driveway

Having a heated driveway has many benefits, including energy-efficient automated operation. Warmzone snowmelt systems have been designed with smart technology to keep the electric radiant heat working properly and safely. Warmzone offers snowmelt systems that feature an impressive 10-year manufacturer warranty which includes up to five times the initial cost to offset costs of reinstalling any defective cables.

HOTNEWS

Electrical Thermal Storage

What is ETS and Why You Should Care

Here’s another acronym that’s worth remembering – ETS. Learning about Electrical Thermal Storage (ETS) may help you save some coin. Who can turn that down right now? And let’s be honest, who would want too? Saving money is on everyone’s mind, and this may be one more chance to do just that. Electrical thermal storage is the term given to certain types of heating, specifically, electrical storage heating that stores heat during the nighttime hours, allowing radiant heat to slowly transfer throughout your home or commercial site without drawing electricity during peak hours.

Some utility companies have adapted their rates to reflect high usage hours. In a way they have copied the telecommunications industry that charges more for calls during peak hours and drops rates during the less trafficked times of the day. Electrical thermal storage heaters draw upon this concept, allowing you to use your heat during non-peak usage times, storing heat for use during the more expensive times of the day.

In-Slab heating cable installed in concrete

You would need to check with your utility company first to make sure they offer these price incentives. If they do (and many are starting to jump on this pricing band wagon) then you may be a candidate for ETS.

Once you establish the rate system of your electrical provider, you may find you could benefit from a radiant heat system that provides electrical storage heating when the rates are lower. While it is important to distinguish that you will not be saving energy with this system, it can save you money because you’ll be taking advantage of the lower rates.

Warmzone offers radiant heating systems compatible with electrical thermal storage. Specifically the In-Slab cable systems provide underfloor heating ideal for this time of money saving advantage. Warmzone’s radiant heating floor systems are an inexpensive system that will effectively warm your floors and heat your entire home or commercial building. When you install In-Slab radiant floor heat, you are given a maintenance-free operating system as well as the peace of mind that comes with a 10-year manufacturer warranty. Warmzone’s In-Slab heat cable is durable, high quality, and hassle free. The In-Slab floor heating systems can be installed to provide luxurious radiant floor heating to almost any type of floor surface. The technology associated with these heat cables make them ideal for electrical thermal storage heating because they are typically installed beneath a concrete or brick floor. While heat is building up, drawing upon your electricity you may use the system during less expensive times of the day. The radiant heat builds up and then once shut down during peak hours, slowly transfers throughout the day from all the heat stored in the slab.

It may not be for everyone, but ETS may be another way you can save money as you heat your home. Contact Warmzone to find out if you can benefit from a radiant heating system that would allow you to take advantage of the cost-saving benefits of electrical thermal storage. ETS – it might just become your favorite acronym.

Electric Radiant Floor Heat – Steps for Installing a Radiant Heated Floor

We all know about forced air heating systems, which use burners to fire up and heat the air and then a fan blows heated air throughout the home. For the most part, this works rather well. It is reasonably quick and for years it has been the standard method of heat for homeowners. So, you ask, what else is there? Well, surely you have heard of radiant heated floors. It’s a form of heating for the home that is becoming more and more popular as of late.

Installing electric radiant floor heating is not extremely difficult. Here are the basic steps to installing a heated floor. (Don’t worry, you can do this.) Let’s assume that you have arrived at the point where you can get started. After thoroughly cleaning the subfloor surface, lay out Reflect ground insulation over the area you plan to heat. A proven ground insulator such as Reflect will optimize the efficiency of your heated floor.

Radiant heated floor being installed in bathroom.

ComfortTile heating cable is available pre-spaced and woven into mats that can be easily rolled out, or individual cable that is laid out with the aid of spacing straps. Individual cable is best suited for custom shapes while the heated mats are ideal for quick layout of standard shapes.

Thinset can be applied directly over heat cable

(It would be a good idea to check the resistance of the wiring before proceeding.  The instructions will give you a range that it should fall within. Temperature can make a difference in the reading as well so keep that in mind.)

If you are installing over a wood subfloor (after applying ground insulation), staple the heating mat or cable spacer tabs to the floor in the desired layout. Be careful to avoid damaging the heat cable anywhere. Lay the cable out in such a way as to allow for the connection to the switch in the wall of course.

Once you have the heat cable laid out and fastened, you should consider pouring a leveling surface over the cable. Technically, you could simply apply thinset and then install your tile, but since the heat cable has a thickness of around 3/8th of an inch or so, it is advisable to pour a leveling surface. Quick Level does a good job of this. Use the adhesion liquid that is recommended. Follow the instructions for applying the liquid and then simply mix the Quick Level with water and then pour it over the entire floor.

Heated bathroom floor

Ensure that it spreads evenly and doesn’t form any lumps anywhere. Only pour to the top of the heat cable. The less you use the better. This will provide you with a clean flat surface to which you will adhere your floor surface.

Tile is a common surface since it conducts the heat very well. Reflect floor insulation is effective in preventing the heat from being lost, and the radiant properties of the tile further enhance the efficiency of the system. Once installed, the sensor embedded in the floor will automatically maintain the temperature you desire.

One of the big advantages to radiant floor heating systems is that you can heat only the rooms you are using. There is no need to heat the whole house. In that sense these floor heating systems are very efficient. The greatest advantage though is the enhanced comfort level you will enjoy. It is really true that when your feet are warm you feel warm and comfortable all over.

HOTNEWS

Snow and Ice Removal Made Easy

It’s that time of year to dig out the coats, snow boots and Halloween costumes again. But there is still time to decide how you want to spend your time this winter season. Are you going to be laboring with your snow shovel to keep your walks and driveways clear, or are you going to relax and let a heated driveway do all the work?

A driveway heating system may seem like a luxury you can’t afford, but Warmzone is making it easier than ever. Whether you want to heat an existing driveway or create a stylish new brick paver driveway, Warmzone offers the industry leading ClearZone snow melting cable to keep your driveway free of snow all winter long.

Radiant snow melting mats and cable

The ClearZone cables are ideal for melting snow in just about any outdoor area, including the growing trend for building outdoor living spaces for recreational and entertainment purposes. Past newsletters have highlighted outdoor living space projects, such as outdoor parlors, each of them using the ClearZone cables to ensure the ultimate in comfort, longevity and ease of use. An outdoor space is a great way to add value and comfort to your home, while still staying within your means.

ClearZone cables are made specifically to withstand the harshest construction applications and extreme weather conditions. Durable ClearZone snow melting cables can be embedded in concrete and asphalt, as well as under brick pavers.

Using concrete saw cutting technology, existing driveways, walkways, ramps and commercial areas can be easily retrofitted with a CZ snow melting system. Advancements in electric radiant snow melting systems have made these systems more energy efficient than ever (99 percent of power consumed goes to snow melting).

A ClearZone snow melting system is available in two different forms: cable on spools and pre-spaced in mats. The cable gives you added freedom when dealing with projects that involve odd shapes, or when installing a system into an existing concrete slab. The ClearZone snow melting mats are ideal for new projects because installation is quick and easy. Simply unroll the mat and continue standard install for concrete, asphalt and brick pavers.

Many snow melting systems on the market cannot withstand the harsh temperatures of new asphalt, and low-voltage systems do not pass the ASHRAE standard for snow melting systems. Warmzone offers the most comprehensive warranty on the market – 10 years and up to five times the cost of the original installation to repair any problems that may occur. Warmzone is a trusted manufacturer and provider of radiant heat solutions and has a worldwide reputation for making top quality radiant products.

Installing a snow melting system eliminates the need for harsh chemicals and snow removal devices, and will increase the life span of your driveway and the value of your home. Whether you’re looking to install a heated driveway or create a new, warm outdoor space, Warmzone can help you plan a system that keeps within your budget and provides a lifetime of benefits.

For more information about ClearZone heat cable and snow melting systems, visit www.warmzone.com, or call 888-488-9276 today.

Project Spotlight – Heated Driveway in Pennsylvania

is newsletter is all about getting ready for winter snow storms with outdoor snow melting systems, so it seems fitting for our Project Highlight to feature a residential heated driveway installed by one of our longtime customers and veteran contractor, Nathan Moyer, from Accent Radiant Heating. This heated driveway turned out so beautifully, we’ve even featured photos from the project on our website.

The Riley family home is located in Milford, Pennsylvania, in a rural neighborhood that receives icy precipitation all winter long. The 1300-square foot driveway required constant maintenance, which became a problem for the Riley’s, of whom suffer from back problems. The house sits on the top of a small hill, making their driveway incline at an approximate slope of 15 degrees. The incline and size of the driveway, combined with the physical challenges of shoveling the snow, made installation of a snowmelt system a necessity.

Snow melting heat cable laid out for asphalt heated driveway.

Prior to winter, the Riley’s gave Accent Radiant Heating a call to explore their options for snow removal systems. Because their existing driveway was built of asphalt, Nathan recommended laying the heating cables on top of the old asphalt. The ClearZone snow melting system was recommended because of its’ unique ability to withstand the high temperatures of the new asphalt.

Using the ClearZone mats snow melting system (with the cable rows pre-spaced and woven into a flexible mat), laying the cables for the driveway was simply a matter of unrolling and connecting four rows of CZ mats. Nathan installed the entire 1300 square feet of radiant cables in about three hours.

After the cables were installed, the new layer of asphalt was shoveled over the cables, using the standard steps for laying asphalt. The installation and wiring of the heating cables to the automatic sensor and control units took Nathan approximately five hours to complete.

Retrofitting asphalt driveway with radiant heat

The end result was a beautiful new asphalt driveway and automated snow melting system that added only one day of work to a standard asphalt driveway repave.

If you are in the Pennsylvania area and are looking for indoor and/or outdoor radiant heat systems, Accent Radiant Heating offers expertise and outstanding service. Contact Nathan Moyer at 267-312-5099 for more information.

If you are out of this area and are interested in learning more about a snowmelt system, contact a Warmzone representative today or call toll free at (888) 488-WARM (9276).

Our knowledgeable staff of radiant heat experts will help you with all your questions and put you in contact with a qualified installer in your area.

HOTNEWS

Home Improvements for Your Feet and Your Pocket

A Smart Choice for Increasing Your Home’s Value

As the housing market crash continues, it seems that even the falling prices, incentives and rebates still aren’t enough to entice new buyers. A year ago a finished home would sell in 4.3 months, it now takes an average of 6.3 months. If you are already a home owner, switching your home from fossil fuel heating to electric radiant heat will not only help protect your investment, but provide an earth friendly efficient alternative that will make your home more attractive to potential buyers.

The best choice for radiant heating is the ComfortTile cable and mats. The CT systems continue to be Warmzone’s best selling electric heat product, and it’s no wonder considering Warmzone attaches a 10-year warranty to every system sold.

This system is the most robust radiant heating product on the market and is manufactured by an industry leader that has been providing quality products for decades.

ComfortTile floor heating mat
ComfortTile radiant floor heating cable pre-spaced in mat.

The most popular spaces for radiant heat in the home are the kitchen and bathroom areas. These areas tend to be the largest area of tile in the home, which also makes it the most difficult to heat. Forced air heating systems only warm the air, which leaves the floors cold and drafty during cold weather months. Radiant heat provides a uniform temperature from ceiling to the floor and warms all the objects and furniture it contacts.

The ComfortTile radiant heating mats are the easiest systems to install. They arrive with the ComfortTile cable already affixed to the flexible mesh, which has a convenient, easy-to-use adhesive backing.

Warmzone’s website is filled with information about how to best install the product beneath tile, stone, and concrete applications. We also have a full staff of professionals available to help you through every step if you choose to install the system yourself. If installing it yourself isn’t your thing, Warmzone has a network of installation professionals in your area that are experienced installers of our systems.

Warmzone has now made the ComfortTile mats more affordable than ever, making it easier for everyone to enjoy the warmth of radiant heating in their homes. Now is the best time to start remodel projects and ready your home for the upcoming winter months, especially if you are pouring new concrete.

Project Highlight – University of Minnesota

Warmzone was recently approached by the Forestry Resources Department of the University of Minnesota, Twin Cities, with a horticulture study that needed Warmzone’s help. The solution: ClearZone radiant heating cables.

The University purchased 46 reels of ClearZone heat cable to measure growth variations in different temperature plots. University officials chose the ClearZone system because of the easy-to-program thermostat, versatility and high durability in outdoor conditions.

The radiant heat system enabled Forestry Department students and faculty to create controlled environments in which to conduct accurate growth rate studies.

Warmzone radiant heat used for university horticulture study

The predominant outdoor use for the ClearZone system is to heat driveways, parking lots, sidewalks and bridges. It is especially useful on disability ramps, where safety and ease of use is most important.

In the past, radiant heat systems have been viewed as a luxury that only a few could obtain. But that’s changing. More and more consumers living in cold regions are discovering that the benefits of radiant heating far outweigh the initial cost.

The study by the University has opened up new avenues for radiant heating that have never been used before. Although still a new concept, the study proves that radiant heat has the potential to be used by home and garden enthusiasts to create a tropical oasis in just about any location to maintain ideal growing conditions.