Add a little comfort and convenience to your life with radiant floor heating. ComfortTile radiant floor heating systems also offer several benefits.

Allergy sufferers will appreciate the ComfortTile radiant floor heating system because it does not require forced air, which spreads dust, pollen and other particles into the air. A radiant heated room warms almost instantly, beginning at the floor and rising upwards.

Radiant heated bathroom floors are particularly popular among home owners. Placing CT heating cable beneath the flooring results in comfort that must be experienced to be fully appreciated. Typically, consumers who have installed a floor heating system claim that they will never go without radiant heated floors again. Most home owners discover the comfort and economic benefits of radiant heat after installing a system in the bathroom, and soon afterwards want the same comfort throughout their homes.

These are just two of the many products offered by Warmzone that are centered around making your home as luxurious as an expensive resort. Pamper yourself with the comfort and convenience of a heated bidet and warm radiant floor!

Project Spotlight
You probably know how outdoor radiant heating cable is installed before pouring the concrete, but what happens when you want to install it in existing cement? That was the problem Warmzone needed to solve for Lockheed Martin, an advanced technology company with a facility located in Denver, Colorado.

Lockheed Martin has a 5500 square-foot ramp accessing a rooftop parking garage. The concrete ramp proved difficult to plow in the winter, and costs to maintain the structure had grown increasingly expensive. During the day, some snow would melt, but the water would re-freeze at night, creating stress on the concrete and making it difficult for employees to access the parking lot in the morning.

Warmzone’s ClearZone snow melting system proved to be the perfect solution, and installers from Silver Leaf Home Improvements in Montrose, Colorado were up for the job!

The solution was simple. Using concrete saw-cut technology, grooves were cut into the ramp from edge to edge at 4-inch spacing. The ClearZone 480 volt, three-phase radiant heat cable was then laid into the grooves and sealed into the ramp using an epoxy topcoat. Before the epoxy cured, Silver Leaf applied a sand broadcast on the surface to create added traction and safety to the ramp.

The end result was a radiant heated ramp with an automatic sensor to activate the system during bad weather – good news for employees of Lockheed Martin! Not only does the ramp require less maintenance with the new radiant heat system, the lifespan of the ramp has also been extended! Plow systems, snow melting chemicals and expanding ice weaken and crack cement, significantly shortening its lifespan.

Lockheed Martin was thrilled with the results and the outstanding installation work performed by Silver Leaf Home Improvements.