(888) 488-9276
info@warmzone.com
Des Moines, Iowa Heating Facts & Statistics
Information provided by U.S. Climate Data & Currentresults.com.
Radiant Floor Heating for Des Moines Homes & Businesses
Des Moines's heating season runs five to six months a year. January overnight lows average 14°F, and daily highs from December through March hover around 37.5°F. Forced-air furnaces work hard through that stretch — blowing dry air around the house and never quite eliminating the cold spots near exterior walls and tile floors. Radiant floor heating solves the problem from underneath.
Radiant heat warms objects rather than air. The heating element embedded in the floor generates heat that spreads out and up, warming surrounding objects, so warmth rises evenly through the room with no drafts, no noise, and no dust circulation. Over 99 percent of the energy used translates directly to heat, so there's virtually no wasted energy. Walking barefoot on warm tile in February is a different experience than huddling around a forced-air vent — and the system stays out of sight, with no radiators, no baseboards, and no ductwork.
Warmzone® offers one of the largest selections of floor heating systems available. Whether you're heating a single bathroom tile remodel in Beaverdale, a finished basement slab in Ankeny, or hardwood throughout a Waukee home, we have a system that fits the floor type, the layout, and the budget. Every system includes free professional design and installation support.
We are not tied to a single brand or product line. Our consultants will recommend the system that genuinely fits your project — not the most expensive one on the shelf. Installation costs typically run between $10 and $20 per square foot, depending on system type and project complexity.
Radiant Floor Heating Options for Des Moines Homes
Warmzone carries floor heating systems for every floor type found in Des Moines homes — tile, stone, concrete, laminate, hardwood, vinyl, and carpet. Each system is designed for your specific layout. The most common options for Des Moines-area projects:
ComfortTile® Floor Heating
The industry standard for tile and stone, and Warmzone's most-installed floor heating system. ComfortTile heat cable is 3/16-inch in diameter and adds almost no buildup to the floor. It's available either on spools for custom layouts or pre-spaced in mats with adhesive backing for quick installation. Designed for tile, marble, slate, and most thinset or mortar applications. UL/CSA approved with a 25-year manufacturer warranty.
In-Slab™ Concrete Heating
Built for concrete slab applications — Des Moines basement floors, garage slabs, and ground-floor pours. The cable is rugged twin-conductor with a single-point connection, laid out in a grid pattern and secured to the remesh before the pour. Plastic supports keep the cable within two inches of the surface for efficient heat transfer. 10-year manufacturer warranty.
FilmHeat™ Floating Floor Heating
The thinnest heating element available at 0.016 inches thick — ideal for laminate, LVT, engineered wood, and bamboo with zero meaningful floor buildup. Panels are cut to length on site and install directly under the floating floor with no thinset, no mortar, no self-leveling compound. UL listed and GFCI protected with a 25-year warranty.
FoilHeat™ Floating Floor Heating
Heat cable sandwiched between two layers of reinforced aluminum foil for even heat distribution under floating floors. Commonly used for laminate, engineered wood, and carpet (with a Luan underlayment). No thinset or mortar required. A strong alternative to FilmHeat where the foil construction has installation advantages. 5-year warranty.
Low-Voltage FloorHeat STEP®
A low-voltage system using a thin, self-regulating semi-conductive polymer panel. Step-down transformers reduce voltage to 60V or less, so a licensed electrician is required for the wiring. Designed for nailed hardwood floors. Same STEP® technology used in Warmzone's roof de-icing systems, in a floor heating format. 20-year warranty.
RetroHeat® Existing Floor Heating
For adding warmth to existing floors without tearing them up. RetroHeat panels are stapled between floor joists from below, with batt insulation applied over the panels to direct heat upward. The most affordable retrofit option for Des Moines homeowners with accessible basements or crawl spaces — no remodel, no disruption to finished floors above.
Prodeso® Heat Membrane System
A ¼-inch-thick uncoupling and crack-isolating membrane with channels pre-engineered for ComfortTile cable. Lays over the subfloor; tile installs directly on top once the cable is set. The uncoupling layer prevents subfloor movement from cracking the tile — useful in older Des Moines homes with mixed subfloor construction. Works indoors and outdoors and acts as a full waterproofing membrane.
ComfortTile® & In-Slab™ for Des Moines Floors
ComfortTile is the most-installed floor heating system Warmzone sells and one of the most trusted electric floor heating products in the industry. The cable is 3/16-inch in diameter, so it adds almost no buildup — important for bathroom and kitchen tile remodels where every fraction of an inch of floor height matters. The pre-spaced mat version rolls out directly onto the subfloor with adhesive backing for a fast install. The cable-only version handles irregular layouts and rooms with obstacles. ComfortTile is the preferred system for tile, marble, slate, and most thinset or mortar floors.
For Des Moines's many homes with concrete basements and ground-floor slabs, In-Slab™ cable is the right answer. The twin-conductor cable goes into the slab during the pour and becomes a permanent, maintenance-free heating element. There is no buildup, no equipment to service, and the slab itself stores heat and releases it slowly — making this one of the most efficient electric floor heating approaches.
FilmHeat is specifically designed for floating floors. At 0.016-inch thick, it adds almost no height to the floor, and it installs without thinset or self-leveling compound — just underlayment, the heating film, and the floating floor on top. It's the right answer for laminate and engineered wood throughout a room. Both ComfortTile and FilmHeat carry a 25-year manufacturer warranty.
Warmzone carries a wider selection of floor heating systems than nearly any other provider. We're not pushing one product line. The consultant evaluates your floors, your layout, and your budget, then recommends what genuinely fits — with no upselling.
There is a real health benefit to radiant heat that most homeowners don't initially think about. Traditional forced-air systems blow warm air through vents, but dust and allergens as well. Ducts can often be filled with layers of dust that ends up being circulated through the house. Radiant heat operates silently, without a blower — nothing is circulated through the air. For Des Moines families dealing with allergies, asthma, or general winter dryness, that difference is noticeable.
Each room can be controlled by its own thermostat, further adding to the precise control and efficiency of the system. Warmzone offers a full range of thermostats, from programmable Wi-Fi smart controllers to simple on/off units with floor sensors. The right thermostat lets you schedule warmth around your routine, run different temperatures by room, and keep operating costs in check across Des Moines's long heating season.
25-Year Warranty
ComfortTile heat cable backed by an industry-leading 25-year manufacturer warranty
Allergy-Friendly Heat
No blowers, ducts, or vents — radiant heat warms without circulating dust or allergens
Free System Design
Custom AutoCAD layouts with load calculations included with every Des Moines floor heating system
Des Moines Floor Heating FAQ
Share Your Des Moines Experience
Had a Warmzone system installed in Des Moines? We'd love to hear how it's working for you. Your feedback helps other homeowners make informed decisions and helps us continue to improve.
Whether it's a heated driveway, warm floors, or roof de-icing — every project story matters.
Ready to Experience Warmzone Comfort in Des Moines?
Whether you're heating a single bathroom or planning radiant heat throughout the house, Warmzone will design a system that fits your floors, your layout, and your budget. Submit your project details for a free, no-obligation estimate.