|Q:||What is FloorHeat STEP?|
is a thin, flexible, yet very durable self-regulating polymer heating element. It is used to
provide comfortable warmth for all types floor surfaces, and comes in a roll (9 and 12-inches
wide). The floor heating element can be cut to the desired length and field-wired on site.
|Q:||Does it require any floor buildup?|
|A:||No. FloorHeat radiant heat systems are extremely thin, so no floor buildup
or construction alteration is required. This is not the case with most other types of
floor heating systems.
|Q:||Does FloorHeat use a thermostat? How is it activated?|
|A:||Each radiant heat system uses a sleek, programmable thermostat. The thermostat can be
programmed to measure floor temperature or air temperature, or it can be set to be on at
|Q:||How does FloorHeat and radiant heat affect hardwood flooring?|
|A:||FloorHeat is an ideal system for
hardwood floors because of its low profile "no-buildup" characteristics
and safe, even heating. FloorHeat is installed under the hardwood flooring and nails
can be used to secure it to the floor without causing any damage to the system. The low-voltage
system produces evenly distributed heat that has no negative effects on hardwood floors
or any other type of flooring.
FloorHeat is also an excellent system for heating under carpet, and can be installed directly under the carpet pad.
|Q:||What if I want to heat my existing floor? Can I still use your floor warming system?|
|A:||Yes. The RetroHeat® system and
installs under existing floors in between floor joists. Both systems consist of panels
that staple to the sides of the floor joists. If you have access to underneath the
existing floor, you can install our our RetroHeat system or the 9-inch rolls of
FloorHeat into the floor joist. After insulation is installed, the system forces heat up
through the floors, warming the floor above. The system can be enough to heat
an entire room, depending on the amount of heat required to heat the room.
|Q:||What kind of warranty is offered?|
comes with anindustry leading 20-year manufacturer's warranty.
|Q:||How long has FloorHeat been in use?|
|A:||FloorHeat was first used over 29 years ago. Since then, thousands of the
systems have been installed worldwide and are still working perfectly.
|Q:||How is FloorHeat secured to the floor?|
|A:||FloorHeat is extremely durable. With a wood subfloor, the
can be directly nailed or stapled through. (However, be sure to avoid nailing through the bus
braids at the sides of the heating element.) With a concrete subfloor, the FloorHeat can be
glued down. The flooring can be installed directly over the
quickly and easily. A plastic trowel or lathe (not metal) should be used when applying thinset
for tile floors on top of the floor heating element.
|Q:||What kind of floor can I put over FloorHeat?|
|A:||Virtually any floor surface can be installed directly over the FloorHeat
STEP heating element. The radiant heat system can be safely installed to heat tile,
slate, marble, hardwood, laminates, and even carpeted floors.
|Q:||Can I use the low-voltage heating element under a metal roof?|
|A:||Yes. Warmzone offers RoofHeat STEP,
the low-voltage heating element (available in different widths) for heating roofs and valleys as well
as gutter trace and
downspout heating. It is essentially the same durable heating element as FloorHeat and is one of the few
roof de-icing systems
that is safe for heating metal roofs. The thin heating element is discreetly installed under
metal roofs as well as shingles. Warmzone also offers several other
roof heating options
and gutter trace solutions.
|Q:||Does Warmzone provide detailed layouts for purchased systems?|
|A:||Yes. Warmzone provides detailed layouts for most systems at the price of $0.35 per square foot. (This price is subject to change. Please call 888-488-9276 for more information.)|
|Additional Information About Radiant Heated Floors BACK TO FAQs|