Tag Archives: Radiant heat services

Warmzone Slab Heating Cable

Warmzone’s In-Slab Floor Heating Cable is Tops in Efficiency

If you’re looking for a way to efficiently, effectively heat concrete floors, In-slab radiant heat cable is much less expensive than hydronic radiant heat and much more effective. Designed for installation in new concrete slab applications, this cable can heat a variety of surfaces quickly, from carpet to tile, hardwood and more.

By its very nature, in-slab heat systems require less upfront investment, are much easier to install and feature much quicker response times. Consider hydronic systems–they’ve been around the longest, and are definitely a reliable source of heat. However, these systems rely on a boiler and a network of pex tubing to heat concrete surfaces, making their installation and configuration much more labor and cash intensive. A boiler is also required to heat the water first, before pumping it through a series of pex tubes embedded in the concrete, resulting in a significant pause before the water is warm enough to generate any heat.

Radiant heated floor and roll of In-Slab floor heating cable

Conversely, In-slab radiant heat cables are controlled by a technologically advanced, easy-to-used thermostat with a built in GFCI and an in-floor sensor. And radiant heat cables do not share the same rigidity in design and installation as hydronic Pex tubing does. Extremely bendable, electric radiant heating cable can be bent to fit into tight spots and can be installed to fit the most challenging spaces. Once installed, a turn (or pre-programming) of the thermostat dial allows the system to generate heat within just a few minutes.

Durable, rugged and waterproof, In-slab heating cable is designed to work under a variety of surfaces, wet or dry. The cable produces 10-15 watts per square foot of concrete surface, making it equally perfect for small, custom, residential applications and large commercial jobs. Quick activation times and heat storage within the concrete slab also end up saving you money in the long run. The In-Slab heating system is one of the most efficient floor heating systems available.

If you’re a do-it-yourselfer, choosing electric radiant heat over a hydronic system can also save you some hand-wringing and a few bucks to boot. Laying out of series of Pex tubing for a hydronic system requires some serious planning and coordination as the pipes are assembled, connected and sealed. In addition to In-Slab heat cable that is provided on spools, floor heating cable is also available in easy-to-roll-out mats that can be installed directly under the flooring. Visit Warmzone’s ComfortTile floor heating web pages to learn more about this electric radiant heat cable that can be purchased right off of the spool or in pre-configured mats. It’s another industry leading floor heating solution that can be used to heat a variety of floor surfaces.

Contemplating an electric radiant floor heating system? Be sure to contact Warmzone for more information on the benefits of In-slab and ComfortTile radiant heat cable at 888.488.9276.

Warmzone’s Professional System Design Services are Second to None

Heated floors and heated driveways can take a very little time to coordinate and install with the right company behind you. Warmzone can take all of the guesswork out of your installation with one simple phone call, so you can get back to boating or barbecuing. What makes Warmzone your best bet for radiant heat installation? They offer a vast selection of premiere products at very competitive prices, along with deep industry knowledge, allowing them to quickly assess your needs to deliver the perfection radiant heat system for you.

Professional radiant heat system design

In addition to offering the highest quality radiant heat products, you’ll get unmatched customer service and complete design services. Unlike your typical big box one-size-fits-all solutions, Warmzone custom designs radiant heated driveways, heated floors, and roof deicing systems to ensure they meet each project’s specific needs. Warmzone understands that regardless of the quality of your system components, a radiant heating system is only as good as its installation. In addition to Warmzone’s personal installation support services, you’ll receive a computer-aided professional system design, giving you all of the specs, from power needs to performance expectations including load calculations, and breaker sizes.

Warmzone’s complementary engineering and design services have set the industry’s gold standard when it comes to accurate, professional system layouts. These technical drawings minimize any issues you may encounter by providing you with all the necessary information prior to any installation taking place. This saves you the time and helps to ensure that your system is installed correctly and performing as advertised.

No matter what your requirements, Warmzone has the experience and expertise to deliver whatever you dare to dream up, whether it be a basic design or custom patio, walkway and steps scribbled on a cocktail napkin over lunch. If you’re not sure what the best solution for your project is, Warmzone can show you the many custom options that are available and walk you through the process from conception to completion. With free quote services, they’re often a good place to start your research, and often the logical place most consumers return to after they’ve shopped around. Warmzone’s dedicated installation support personnel are available to assist you should you have any questions during the installation process. Warmzone also offers free installation training for installers. You won’t find a more dedicated, knowledgeable and helpful staff than that of Warmzone.

At Warmzone, competence and quality win the day, every time. For more information on Warmzone’s system design and engineering services, call888.488.9276.

Superior Products and Unmatched Services

Warmzone Sets the Gold Standard When it Comes to Customer Service

Tis’ the season for construction and home improvement projects, but finding the right provider and installer for your radiant heat installation can be tricky business. That’s why you should work with experienced pros who emphasize COMPLETE solutions and unparalleled customer services – like Warmzone. So, what’s Warmzone got that the others haven’t?

Knowledgeable Experts who Actually Listen. If you’re on the fence about an installation, no worries. Warmzone professionals are always available to answer your questions. If you’re interested in a radiant heat solution, Warmzone can work with you to determine which system and design is best for your specific radiant heat needs.

Snow melting system installed under pavers

Lots of Choices. Awesome Prices. Warmzone’s selection of radiant heat systems and products represent a wide variety of the best solutions in the industry. Offering more than one brand gives Warmzone the flexibility and freedom to dial in a system that’s just right for your home, and your budget.

Inclusive Design Services. All Warmzone custom radiant heat solutions come with a professional system design at no extra cost to you. You’ll know all the technical specs and power requirements before any heat cable is laid out. Warmzone designers are experienced pros when it comes to designing the most effective and energy efficient system possible for each unique installation. This ultimately saves you time and money, and eliminates any costly “surprises” during the installation.

A resource of Qualified Installers. No matter what system you purchase, a radiant heat system will only be as good as its installation. Warmzone understands that finding the right installer can be a bit of a crap shoot for homeowners. Despite having the best radiant heat system components, it can all be for naught if your contractor isn’t up to the job.

Warmzone can help take the guesswork out of the hiring process. In addition to maintaining relationships with professional installers throughout the country, Warmzone also provides free installation training. This means that Warmzone can recommend contractors in your area who are trained in radiant heat installation. This is just one more service in Warmzone’s long list of comprehensive customer services.

Excellent Follow-up. Ever get the feeling that your contractor steps into a project with one foot out the door? At Warmzone, your customer service experience doesn’t end with your purchase. They’ll stay with you throughout the installation process to ensure that your system is installed correctly and performing as it should.

Lots of Support. When you call Warmzone the voice at the other end of the phone is an expert in radiant heat solutions who can answer questions regarding your installation. Installation support is included with every system Warmzone sells.

With any big home improvement purchase comes some serious homework. If you’re shopping products and/or contractors, add Warmzone to your list of possibilities by simply calling 888.488.9276.

Warmzone’s Industry Leading Product Line

Warmzone Offers a Wide Variety of the Industry’s Most Proven Radiant Heat Solutions
When it comes to selection, you’ll find products, products and more products are what makes Warmzone excel in delivering outstanding radiant heat system quality. Unlike many radiant heat providers, Warmzone is not locked into selling customers ONE brand or type of system or heating element. Warmzone offers a wide variety of the industry’s top radiant heat solutions for interior and exterior applications.

Just how vast is their product selection? Warmzone offers a great opportunity to shop brand names and systems that can be installed under virtually any type surface, for virtually any type of application, indoors or out. Consider, for example, Warmzone’s impressive selection of proven, radiant floor heating applications:

Floor Heating Solutions

ComfortTile  Designed specifically for heating ceramic tile floors, this proven industry leader is compatible with all standard sub-flooring materials and can effectively heat virtually all types of floor surfaces.

FloorHeat This thin, low-voltage polymer heating element can be installed directly under laminate and hardwood floors to deliver luxurious warmth without any floor build-up.

In-Slab Heat Cable Designed for installation in new concrete slab applications to efficiently store and distribute heat.

RetroHeat Allows you to heat existing floors. By accessing the floor joists from below, the thin heating element is stapled up in the floor joist and then insulation is applied to efficiently direct the heat upwards to warm your existing floor.

FilmHeat This paper thin heating element can be cut on site to deliver moderate heat to laminate surfaces without buildup.

FoilHeat radiant floor heating system

FoilHeat Incredibly thin and efficient floor heating mats for use under laminate, wood, glued hardwood and other types of floating floors.

Hydronic Lightweight aluminum Rau panels with flex tubing is the premier hydronic radiant heat solution, and is easy to customize for your specific project needs.

To address your needs outside, Warmzone offers industry-leading products designed for concrete, paver, and even hot asphalt installations, as well as the top roof deicing and gutter melt solutions. Warmzone snow melting systems are second to none, and you can take your pick from heat cable off the spool or preconfigured in easy-to-install mats. In addition to its embedded snowmelt systems, Warmzone also offers portable snow melting solutions.

Regardless of your situation, be it time, budget or application, Warmzone has a product and design to best meet your requirements. For more information on their complete line of radiant heat solutions, call 888.488.9276.

Why Warmzone’s Self-Regulating Heat Cable is a Cut Above the Competition

Banish Snow and Ice from your Roof and Gutters, and Protect Pipes with the Industry’s Top Self-Regulating Heat Trace Cable

With sub-zero temperatures upon us, the last thing most of us want to do is fool around with manual outdoor snow and ice removal. As the temperatures maintain their frosty grip on much of the country, installing a radiant heat solution for your roof, gutters and pipes is a wise, potentially cost-savings move. Featuring a superior outer jacket and carbon core, making installation in frigid conditions possible, Warmzone self-regulating cable truly is the best choice.

What makes Warmzone’s self-regulating cable unique? The outer jacket of other leading brands of heat cable tends to “bubble” or separate from the cable core when the cable is manipulated for turns. These irregularities create stress points on the cable that allow water to reach the core, causing erratic heating and eventual cable failure. To better illustrate this point, consider the photos shown. At a bend radius of about 2 inches, the outer jacket of other popular heating cables bubbles and pulls away from the core, creating a visible stress point prone to water seepage and eventual failure.

Comparing heat trace cable bending radius

At a bend radius of 1½ inches, the outer jacket of the Warmzone cable is smooth, showing no signs of bubbling. The durable outer jacket is more flexible, so it minimizes “puckering”, even at a tight bend radius. These performance differences are extremely important in applications where tight cable manipulation is critical, including gutters, roofs and pipe tracing.

Warmzone self-regulating heat cable can also be installed at much lower temperatures than most, and that’s critical if you’re in a region prone to colder conditions and in need of a solution right now. That’s because the minimum installation temperature for most self-regulating heat cables is 32 – 40°F. At temperatures lower than this, the carbon becomes brittle and prone to breaking when bent or manipulated; and the outer jacket of most competitive cables also tends to stiffen, making it difficult to safely install in cold weather.

Warmzone self-regulating heat trace cable with durable outer jacket

The high quality carbon center of Warmzone’s self-regulating radiant heating cable is much more resilient, and can withstand installation temperatures as low as 0°F, making them a safe bet for installation in some rather frosty conditions. Factor in the flexibility of the outer jacket in the same weather and you can expect easier installation and more reliable performance.

If you’ve decided on Warmzone radiant heating cable, perhaps the hardest sell is finding the right installation team for the job on short notice. Warmzone can help with that too. They’ve forged deep relationships with wholesalers and general contractors across the country to deliver the most advanced, reliable snow melting solutions around, and they’re a great resource for installation support. Just give them a call at 888.488.9276 and discover how Warmzone can keep ice off the roof, out of the gutter and away from your pipes.

Warmzone Design and Support Services

Warmzone Customer Service is Second to None

If you’re one of many savvy business owners intent on growing your business with radiant heat, Warmzone’s design services are an invaluable resource. Each and every radiant heat solution you purchase from Warmzone comes with a professional consultation, including an AutoCAD system design, so you’ll know the exact power requirements and performance expectations for your project prior to installation. These services are second to none in the industry, and are included with your purchase.

Overwhelmed by the prospect of tackling something new? Warmzone’s design team can take a lot of the work and headache out of the equation for you so you can competently recommend and deliver the right radiant heat solution for your customers. Our experts free you up to do what you do best, so there’s no need to feel overwhelmed by the prospects of installing a radiant heat system when you work with Warmzone. If you can send us a rough drawing of the project on a piece of paper or describe it over the phone, Warmzone will take care of the details from there. We’ll specify the correct materials, load calculations, breaker sizes, the number of breakers you’ll need, etc. So again, don’t be intimidated by installing radiant heat. Warmzone will take care of the details as well as provide personal installation support. When you partner with Warmzone to install radiant heat, you’re never alone. And our experts are the best in the business.

Example of Warmzone radiant heat system AutoCAD

Warmzone has the breadth and depth of products and design services you’ll need to complete your next project quickly, efficiently and within budget, without compromising quality. And you won’t have to go it alone. Warmzone stays with you throughout the installation process to make sure the system is installed correctly and performing as advertised. Your dedicated account manager will follow your project from start to finish to your complete satisfaction.

In addition to personal installation support, you also have access to a library of installation resources available at warmzone.com. Warmzone maintains a vast collection of documentation, photos and illustrations that can assist you during your installation or selection process.

Deep industry knowledge and design experience informs every radiant heat design Warmzone renders for their customers. Over the years, their design team has developed relationships with experts in cutting edge radiant heat technology, along with plenty of insights they enthusiastically pass on to installers and contractors selecting and installing radiant heat for their customers.

Warmzone also offers product and installation training. including certifications provided upon completion of training. If you’re in the area, you can also take advantage of in house training with Warmzone professionals.

Whether you’re new to radiant heat technology, or have a specific project you need help with, give Warmzone a call at 888.488.9276. The call is free, the quote is free, and the advice, invaluable!

Warmzone Ups the Ante

Warmzone Adds Free Radiant Heat Installation Training to its Impressive Collection of Online Information and Consumer Services

Warmzone has always taken pride in its industry leading products and customer services. And when it comes to providing information on radiant heat, Warmzone very well may offer the single most impressive collection of information on the Internet. With a website that already houses a vast collection of documentation, illustrations, photos, and instructional videos, Warmzone has further bolstered its informational services by offering free, interactive online training sessions.

Heated driveway with brick pavers

Dubbed “Warmzone University”, the online courses focus on all types of radiant heat system installations. Whether you are looking to install a heated tile floor, a roof deicing system, or a heated driveway, these instructional courses cover it all.

Warmzone is also registered as an AIA CES approved provider, so in addition to the various installation courses, a course is also offered for contractors to meet their continuing education requirements. Warmzone reports the credits earned by attendees to the AIA CES, and attendees also receive a Certificate of Completion for the AIA.

Warmzone is also working on a comprehensive “How to” section to add to its website. The section will address the top issues based on the most common questions received by Warmzone’s installation support staff – on all types of radiant heat installations. The information will be posted for homeowners and installers to freely access to learn more about the how’s and why’s of radiant heat installations.

Top Products and Custom Options

With one of the largest selections of electric radiant heat solutions in the business, Warmzone will custom design a system to meet or even exceed your expectations – and your budget. Their professionals will step up from your initial inquiry to offer solid solutions to your heating requirements, regardless of the size or shape of your driveway, free of charge.

You have several options to choose from when it comes to heating your driveway. You can install snow melting cable under the entire area of your driveway or install heat cable only in the most trafficked area. This usually involves the installation of an 8-10 foot strip up the middle of your driveway. Another economical alternative involves installing heat cable in two 24-inch wide tire tracks.

You can save even more money by doing much of the installation yourself. The cable is relatively easy to install, but it is important that a qualified electrician perform all the wiring. An extensive library of free articles, manuals and installation information is also available on Warmzone.com.

Summer is the perfect time for outdoor home improvement projects. Find out if there’s a Warmzone ClearZone heated driveway in your future by calling 888.488.9276 today.

Warmzone Focuses on Customer Service

Things are Heating Up at Warmzone
As one of the most trusted providers of radiant heat solutions, it’s no surprise that Warmzone has established itself as a leader due to its outstanding customer service. For contractors and homeowners alike, Warmzone has proven to be the ideal partner when it comes to installing radiant heating systems – for both indoor and outdoor applications. From complete system design services to personal installation support and free training, Warmzone is focused on meeting all the needs of its customers.

Heated concrete driveway for mountain lodge

Customer Comments
It’s nice to know there are still companies out there like Warmzone. These guys care about getting the job done right. Thanks to them, my wife is happy and we’re thrilled with the warm floors. Perhaps the best part of all this is that I was able to stay within budget on this project. Thank you Warmzone.
          – Erik G.

I would like to express my gratitude towards your organization. I was doing a kitchen floor remodel and living room floor remodel. My wife and I decided to pull up carpet in the living room and tile the kitchen. I decided that from talking to others who have done the same, that they experienced cold floors in the winter months. I decided to research “Radiant heat“. I was at our local Home Depot store and they were all set in selling me their product. I decided to research out electric radiant floor heating on the internet.

Thanks to the Internet I found places that gave me a lot of info. However, as I filled out your questionnaire at “Warmzone” I was pleasantly surprised at the response I got from Matt. He was extremely pleasant to deal with was extremely knowledgeable of your product, and if he did not know the answer he said so and got the answer I needed. After the purchase of your products (insulation and ComfortTile heat cable for under tiles), I started my homeowner installation. I am very handy with my construction abilities. However, I never put in a radiant heat system. In short Matt was able to answer any questions I had come up with (and they were numerous) and keep me rolling along.

Not only was Matt very helpful and knowledgeable about the installation but when I had electrical question about the programmable thermostat, Matt had hooked me up with Dan. Dan effortlessly had me program my thermostat and was working like a charm. My hat goes out to all at Warmzone for your great product and customer service. I feel that your company is one of the best for customer service!!! Thank you Warmzone for the great service.
        – Rick M. (Maine)

Call Warmzone at 888.488.9276 for more information and project consulting, all free of charge, of course!

Warmzone FilmHeat Floor Heating Systems: Evolving the Way You Heat Your Home

What if you could heat an entire room, or even a home, for that matter, using a simple roll of film? Believe it or not, Warmzone has once again outdone the competition with a roll of film that’s amazingly durable, thin and flexible that can do just that. Like all Warmzone radiant heated floor solutions, FilmHeat can be nailed or stapled to the subfloor. Its slim proportions make for incredibly easy, unobtrusive installation under laminate surfaces.

The thin FilmHeat heating element

FilmHeat floor heating systems are composed of three elements. The film element works with a power unit and activation device to deliver fast, efficient heat to any laminate surface in your home. Much like a forced-air system, the power unit, or “brains” of the system, communicates with a thermostat linked to sensors. Strategically installed in the floor, the sensors “sense” the temperature of the room and relay that information to the power unit to activate the system. This system is fully automated, responding to fluctuations in room temperature as they occur to deliver and maintain even, consistent heat in any room.

In addition to being incredibly thin, the FilmHeat floor heating system is incredibly safe and can be installed in retrofit applications. You just need to be able to access the floor joists from below. FilmHeat is also one of the most efficient floor heating systems on the market.

The lightweight heating element makes FilmHeat particularly easy to install. The elements paper-thin quality allows can be easily cut on site, and requires no floor buildup. So you can install it without major renovation, which is incredibly good news if you’re a first-time do-it-yourselfer contemplating a radiant heated floor home improvement project.

If you’re hesitating on cost, initial installation costs involving FilmHeat floor heating systems are low. Of course the ease of installation makes the cost for do-it-yourselfers even lower. And like all Warmzone radiant heated flooring solutions, the system relies on a sustainable heat source, electricity, so it can run for mere pennies on the dollar.

And in a time when the popularity of green living is growing, the FilmHeat floor warming system allows you to significantly reduce the usage of your primary heating system to realize greater energy savings while lowering your monthly heating bills. To move you even further off of the grid, the system can also be run by solar and wind power sources. It’s a positive contribution to your environment you can feel really good about.

Interested in learning more about the power a roll of film can play in heating your home? Call Warmzone at 888.488.9276 or browse the website for more information on the wonders of FilmHeat floor heating systems.

In Search of the Best Radiant Heat Solutions Provider

Looking for a good supplier of radiant heat systems for your next project? While there are lots of folks out there, it didn’t take me long to narrow the field down to just one. Before I divulge the winner, I’ll share the criteria that helped frame my final decision:

Radiant heat installation and service providers

Friendliness – If I’m going to invest in a home improvement project, I expect the experience to be pleasant, at least.
Helpfulness – I want an advocate, someone who knows what it means to go the extra mile for their customers.
Knowledgeable – I don’t want to talk to a “salesman”—I want to talk to a radiant heat expert who can design and sell me a custom radiant heating solution.
Responsiveness – If I leave a message or ask a question that can’t be answered immediately, does the rep call me back in a timely manner?
Respectful – Regardless of my purpose of calling (whether to ask questions or make a purchase), does the rep treat me with respect?
Listening Skills – I want someone to listen to what I need; evaluate those needs and then present me with options. Someone who knows how to ask the right questions.
Professionalism – I need to feel confident in my choice of radiant heating solutions.

In the end, the clear winner was Warmzone. Here’s the why of it:

Best Product Quality and Largest Selection

If you want the best possible solution at the best possible price, you’ll obviously want to go with a supplier that offers a comprehensive selection of radiant heat solutions. Warmzone has one of the largest and highest quality product selections available. They aren’t locked in to trying to sell you one particular product or brand, so you get an objective suggestion of what’s best for you. Because they deal in huge volume purchases, Warmzone also realizes a cost savings they will happily pass on to you

Complete System Design and Engineering Services

Knowing the exact power requirements and performance expectations prior to any installation is critical. With Warmzone you can expect to receive complete radiant heat design and engineering services with each system you purchase.

Genuine, Helpful and Friendly Customer Service

It would be hard for me to imagine a more knowledgeable, friendly staff then the staff at Warmzone.

Expert Installation Support

At Warmzone, the relationship doesn’t end with a purchase. Their experienced staff will work closely with you to ensure your radiant heat system is installed properly and performing as expected.

Comprehensive Information and Resources

No competitor comes close to matching Warmzone in this category. Visit their literature / documents section and you’ll see what I mean. (Incidentally, another great resource for information about radiant heat is www.bestradiantheating.com.)

Summary of Warmzone Top Notch Services

  • Product Quality and Selection
  • Complete System Design and Engineering Services
  • Customer Service and Installation Support
  • Radiant Heat Information Resource (collection of online information.)
  • Radiant Heat Product Manuals, Guides, Illustrations and more.

Call 888.488.9276 to learn more or visit www.warmzone.com.

Do Your Radiant Heat Project Right With Warmzone

We can Help With Complimentary Consulting, Design and Post-Sales Support Services

If you’re currently shopping radiant floor heating solutions for your home, it’s important to choose a company that can deliver competitive prices, complete system design, and post sales support in equal measure. Warmzone can do just that. The folks at Warmzone have one goal in mind—to offer the best radiant products in the industry and professionals to help with all aspects of your project, making the sale, design and installation as smooth as possible.

You’ll get more for your money with a Warmzone radiant heat system than any competitor. At Warmzone, you’ll benefit from:

  • Radiant experts with the most industry experience
  • Non-biased radiant heat information based on your specific needs
  • In-house expertise to help you with any concerns you or your client might have, including:

Mechanical Engineers / Designers – Warmzone will custom engineer and provide a detailed layout for each job.
Technical Installation Support – We will support you through all aspects of the installation.
Hydronic Experts – Assist with all the details of your designs, installation and applications.

Heated tile floor

A diverse selection of top quality products and unmatched support services during and after installation are key points that separate Warmzone from the competition. Your Warmzone purchase entitles you to an impressive menu of professional support services. From conception to completion, Warmzone’s master electrician and other installation experts are always on hand to assist you with your radiant heat project, if and when you need it.

Before you make any formal purchase decision, you’ll benefit from a thorough assessment of your project. Warmzone’s professional team of mechanical engineers / designers will evaluate your radiant heating system from top to bottom and create a detailed CAD of your system layout. You’ll have a clear understanding of the electrical requirements, technical specifications and system performance before any heat cable is installed.

Warmzone recognizes that radiant heat systems are only as good as the installation. They will work closely with you to ensure proper system installation, long after your initial purchase is completed; and stay with you until your radiant heat system is installed and working properly, to your complete satisfaction.

The fact is, when it comes to radiant heat, you simply won’t find a more knowledgeable, helpful and friendly staff than the folks at Warmzone. Their consultants are highly trained, experienced radiant heat professionals; craftsman who take pride in meeting your needs and are willing to listen. A wide selection of top radiant heat products also gives these professionals the opportunity for honest, unbiased recommendations that fit your needs, from actual heat requirements, to budgetary concerns and project timing.

If you’re going to install radiant heat, then do it right. Use the best products and work with the most experienced, knowledgeable professionals available. A radiant heat system is only as good as its installation, so it makes sense to go with the experienced pros at Warmzone, who offer the best customer service and installation support in the business.

Warmzone: The Most Comprehensive Online Information Resource

Warmzone’s heating up the web as the largest digital radiant heat information and resource provider

If you’re in the market for a radiant heat solutions provider, but waffling on which one to choose, it’s worth putting Warmzone at the top of your list. Because radiant heat is a relatively new technology for many consumers, Warmzone is dedicated to providing convenient, clear information to their customers, a philosophy that begins with interactions between customer and radiant heat expert, and extends to the web.

Heated driveway on incline with heated tire tracks

You’ll find the most comprehensive digital library of radiant heat information and resources available today at Warmzone.com, including downloadable versions of installation manuals, user guides, installation manuals, cross section diagrams and more, available to you, 24/7:

Articles Read on all types of radiant heat applications, from small home floor heating projects to large industrial snow melting systems. You’ll undoubtedly find what you’re looking for in our vast online catalog of radiant heat articles.

NewsBlogs These blogs cover many, many topics ranging from indoor radiant heat systems to driveway heating, roof deicing and radiant snow melting systems. You’ll enjoy firsthand accounts from real radiant heat customers, including professional installers and “do-it-yourself” homeowners, as well as installation tips, “how-to” guides, product comparisons and information.

Press Releases Get up-to-the-minute Warmzone company news and radiant heat product information, including late-breaking industry information and product releases. Or search the archive for past and current industry trends, news and more.

Warmzone University Instructional Video Library —You’ll find lots and lots of television clips as well as installation videos on Warmzone, and various types of radiant heat systems; including broadcasts from the Bob Vila show, the Do-it-Yourself television network, and the Platinum Television Group’s feature of Warmzone on its education series, Great Tastes.

HotNews —Tap into the company newsletter for the most current radiant heat industry information, HotNews. There’s something for everyone—whether you’re a homeowner or a radiant heat installer, you’ll find up-to-date industry news, insightful project spotlights, new product information, technical tips and more.

In addition to these superior online resources, Warmzone offers an unparalleled menu of energy efficient alternatives to traditional heating systems, backed by the experience necessary to truly your needs and propose a radiant heat system that will provide the results you desire without weeks of research. Warmzone has formed relationships with companies worldwide that are best in class, allowing them to offer the highest quality, proven products at the best prices available. Check them out today at www.warmzone.com, or call Warmzone at 888.488.9276 to start planning your next radiant heat project.

Warmzone Growth Continues

Warmzone Moves Headquarters to Larger Facility

Salt Lake City, Utah (PR WEB) – March 2, 2012Warmzone, a leading provider of radiant heat solutions has announced that it is moving its corporate headquarters from downtown Salt Lake City to a much larger facility in Draper, Utah on March 5, 2012. Located just 18 miles south of the old Warmzone headquarters, the new facility boasts greater office space and increased warehouse capabilities.

In spite of the sluggish economy and recent economic challenges, Warmzone has continued to experience growth, necessitating the move into a larger building. The new facility will allow Warmzone to significantly increase the amount of inventory it has in its Utah facility, which will ultimately translate into even quicker service for Warmzone customers.

“We feel fortunate that we’ve been able to grow our business in these difficult times,” stated Executive Vice President, Brandon Weaver, “and we attribute the growth to our superior customer service and support. In today’s economy, people are demanding more in an effort to stretch their dollars, and it’s not enough to just offer competitive pricing. Businesses have to earn customers’ trust and provide expert service from beginning to end.”

In addition to Warmzone’s preeminent customer services, the company offers a wide variety of proven radiant heating solutions, ranging from heated driveways and floor heating solutions to roof deicing and portable snow melting systems. This allows Warmzone to offer the ideal solution for the unique needs of each customer. Every project is carefully evaluated and designed prior to any installation. Given the wide product offering and renowned customer services, Warmzone’s growth seems a natural progression.

“We’re looking forward to settling into the new building,” Weaver added. “The move will certainly benefit our customers. One thing’s for certain,” he concluded, “we will continue to focus on what got us here, and that’s our superior products and our industry leading service.”

Add Radiant Heat to Existing Floors

How and Why RetroHeat Works for You

The heat of July is fully upon us. It’s getting harder to imagine a time when the air conditioner was turned off and the heat was on full, but it wasn’t too long ago, and now it’s not too far in the future. It’s time to think about how you’re going to heat your home this coming winter, and a RetroHeat floor heating system from Warmzone is one of the best radiant floor heating options available.

RetroHeat is a cost-effective, easy-to-install product that is a great project for you to manage on your own. If you have clear open access to the floor joists of the room you would like to heat, then installing radiant heat is a snap. If you would love to add underfloor heating to a room but don’t want to destroy your beautiful home to do so, RetroHeat is the clear solution. A roll of RetroHeat paneling can add heat to a room that didn’t have it before, without ripping existing floor structures. Simply staple the heating panel between the floor joists, followed by a layer of insulation and ka-pow! You’ve got yourself a radiant heated floor.

RetroHeat installed to heat existing tile floor
The RetroHeat floor heating system features a thin, film heating element that can be stapled up between floor joists to heat the existing floor above.

Any type of floor can benefit from RetroHeat’s floor warming system. The carpet in your living room, the hardwood on your walkways, the tile in your kitchen; all of these are capable of being made more cozy with the RetroHeat floor heating system. A simple-to-understand heating thermostat gives you complete control over temperature and time release.

If a RetroHeat project seems like the right fit, the unbiased experts at Warmzone are the most knowledgeable to work with, and they’ll help you design the system that will work best for you. Radiant floor heat is a great solution if you would rather not spend money on a new circulating air system. RetroHeat floor heating systems warm the ground beneath your feet rather than the air above your head.

RetroHeat’s benefits aren’t only cost and ease of installation. The heating panels are energy efficient, thin and lightweight. No energy is wasted in heating air and then blowing it through the house; instead, the energy is directly transferred to your floors. Because of their unique installation, no floor buildup is necessary.

Stapling up RetroHeat floor heating element

Maybe there’s a room in your house that has always seemed colder than the others, or a late addition that didn’t get the same insulation as the rest of your house. Or maybe you want to warm your cold tile so that you can walk barefoot through your house in the winter. Whatever the issue, RetroHeat is an excellent floor heating solution.

Questions? Call a radiant heat professional at 888.488.9276.

Heating Professionals Seek Out Warmzone

More than a luxury, electric radiant heating systems are increasingly becoming part of the menu of products and services offered by hydronic and HVAC professionals. In 2010, hydronic and HVAC professionals were Warmzone’s top customers. The good news—whether you’re incorporating electric radiant heat into a new residential construction project, or embarking on a home improvement project, your chances of finding a Warmzone partner are just a phone call away.

Why are HVAC and hydronic professionals partnering with Warmzone? Warmzone is committed to the success of commercial contractors and customers, and strives to offer the best radiant products, plus professionals who can help with all of the aspects of a project to make the sale and installation run as smoothly as possible. And just like the professionals, as a Warmzone customer you also have access to radiant heat designers, master electricians and hydronic specialists with the in-house expertise necessary to plan and execute just about any radiant heat project within your scope and budget. These heat experts have the most industry experience and the ability to provide non-biased radiant heat information based on your needs.

The comfort, convenience and the technology behind radiant heat systems have helped to create the perception of luxury and exclusivity. Why not put this perception to good use for your next home improvement project by investing in electric radiant heat? It’s a unique selling point, an impressive comfort and convenience feature, and a potential equity booster for homeowners. More than a little luxury, radiant heat is becoming a homeowner’s necessity in today’s economy. You’ll be surprised (and pleased) to discover how efficient, from an operational standpoint, and how truly affordable these systems really are. For a small initial investment, the cost and convenience of electric radiant heat can really pay off in the long term.

Electric radiant heat is becoming a mainstay in world of hydronic and HVAC technology because it provides a safer, cleaner, greener alternative to traditional systems. It derives its power from electricity rather than costly fossil fuels. With the help of sensors and a zone-specific thermostat, radiant heat enables homeowners to selectively heat rooms quickly, where it’s needed most, and realize an energy savings in rooms where it isn’t. Unlike forced air systems, radiant heat radiates up through the floor and objects to warm a room. It’s quick, efficient and instantaneous. There’s no hot air or air ducts involved, so there’s no blowing allergens and other contaminates to compromise air quality, making radiant heat a safer choice for home environments.

Warmzone has many products to fill many heating needs. Call an expert today at 888.488.9276 for help designing a floor heating or snow melting system, to buy products, or just to learn more about radiant heat.

High Quality and Low Prices

Why Warmzone is a Leader in Radiant Heat Products and Services

Warmzone is earning its reputation as the highest quality radiant heat source in the business. With the launch of Warmzone’s new, streamlined website, as well as the company’s impressive roster of heat systems, coupled with computer aided designs (CADs) and the wealth of information and insider designer talent, Warmzone is constantly leaving the rest of the competition out in the cold.

Radiant heated driveway

Warmzone’s new website was launched with one goal in mind – putting information and easy contact into the hands of the consumers. According to Warmzone VP of Sales and Product Development, Brandon Weaver, consumers deserve to have as much current radiant heat information as possible at their fingertips. “Homeowners are carefully researching and comparing before making any significant purchases nowadays,” Weaver explained. Warmzone.com was designed to make that research easier. Warmzone’s revamped website is the one-stop resource to learn about the newest in radiant floor heating systems and snow melting systems, as well as the place to request a free quote.

There are two ways on the website to get in contact with Warmzone and ask the questions that you, as a homeowner, need to know. The first way is to log on to the Warmzone website and click on “Request a Quote.” From that page, it’s easy to find information on the product that is most important to your specific needs. The other way to contact Warmzone is simple: Click on the “Contact Us” link. Answering a few questions on that page will help a Warmzone expert set you on the right path to a warmer home or snowmelt system.

Warmzone Offers Top Products

Why Warmzone is the Leader (Part II)

Warmzone takes pride in its impressive roster of products designed to suit every need. Not only can Warmzone heat your hardwood floors and kitchen tiles, but they also provide snow melting systems, roof deicers, and Runtal energy-efficient wall-mount heaters. Warmzone’s innovative approach is to use many of the top brands and types of product, which helps keep heating solutions at prices you can afford. As the premier provider of radiant heating systems, Warmzone wants to warm you from the ground up, and they have solutions that can target any type of floor or snow melting solution.

With all of the different types of industry-leading heat solutions at their fingertips, Warmzone experts and designers employ easy-to-read and understand Computer-Aided Designs that explain exactly how the project will be envisioned. This CAD is not only crucial to finding the best way to heat your home, it’s also a time and money-saver that makes sure the project is sound from any angle. Every single Warmzone system is custom designed from CADs to fit your home and your wallet’s needs.

Sample layout of a radiant floor heating system

The people at Warmzone are especially climate-attuned. Every expert and designer is fully aware of the environment and our increasing dependence on harmful energy sources, which is why Warmzone is an advocate of green, renewable energy. Warmzone emphasizes green energy in the products that they carry, as well as how those supplies are shipped. Most companies ship from manufacturer’s to their own warehouses, and then from those warehouses, to the customer – but to cut down on gas emissions and customer shipping cost, almost all the materials Warmzone uses can be shipped directly, from manufacturer to customer.

Warmzone is committed to finding you a solution that will help you find warmth in your life. Whether you need to keep your driveway free of snow, or your feet toasty as you enjoy breakfast with your family, Warmzone has the solution that will make your day cozier.

Request a FREE quote or call 888.488.9276 today.